UCT Wifi Password

Connect your Android device to the UCT wireless service

To set up your connection to eduroam, you need to first secure your device and then set up an eduroam connection.

Step 1: Secure your device

Before you connect to the UCT wireless service, your device must comply with UCT Networking policies:

  • Your device must have the latest operating system updates or patches (available via your device’s Software update feature).
  • Your device must have an up-to-date anti-virus software program (there are numerous well-known apps available for mobile devices).

Failure to comply with these requirements puts you in violation of the Policy on unsecured computers at UCT – and you could lose access to the UCT network.

 

Step 2: Set up your eduroam connection in one of two ways

Automatically set up your computer using eduroam CAT
  1. Install the eduroam CAT app (by GÉANT Association) from the Google Play Store.
  2. Return to this article and tap the link corresponding with your operating system:
    • Android 8.0 (Oreo)
    • Android 7.0 (Nougat)
    • Android 6.0 (Marshmallow)
    • Android 5.0 (Lollipop)
    • Android 4.4 (KitKat)
    • Android 4.3 (Jelly Bean)
  3. In your device’s notification area, tap the downloaded installation file.
  4. When the file opens in the eduroam CAT app, tap Install.
  5. Enter your UCT username@wf.uct.ac.za and UCT network password then tap Install.
or
Manually set up your device

Instructions may vary slightly, depending on your version of Android. However, the actual configuration settings (step 4) are correct for all versions of Android.

  1. Turn your device’s WiFi On.
  2. Access your device’s Settings > WiFi.
  3. Select the eduroam wireless service.
  4. When a dialog box prompts you to enter configuration settings, enter the following:
    • EAP method: PEAP
    • Phase 2 authentication: MSCHAPV2
    • CA certificate: leave as blank / unspecified / Do not validate
    • Identity: username@wf.uct.ac.za (where “username” is your student or staff number)
    • Anonymous identity: leave this field blank
    • Password: UCT network password
    • IP settings: DHCP (you may have to Show advanced options to view this field)
  5. Tap Connect (or OK).

 

Connect your Windows laptop to the UCT wireless service

 

To set up your connection to eduroam, you need to first secure your computer, then set it up to connect to eduroam and, finally, configure your web browser.

Step 1: Secure your computer

Before you connect to the UCT wireless service, your computer must comply with UCT Networking policies:

  • Your device must have the latest operating system updates or patches.
  • Your device must have an up-to-date anti-virus software program (e.g. McAfee – which is available at no cost to all UCT staff and students).

Failure to comply with these requirements puts you in violation of the Policy on unsecured computers at UCT – and you could lose access to the UCT network.

 

Step 2: Set up your eduroam connection in one of two ways

Automatically set up your computer using eduroam CAT

NOTE:
If your laptop can also connect via network cable, configure your web browser(s) for automatic proxy detection.

  1. Download the installation file for your operating system:
    • Windows 10
    • Windows 8 and 8.1
    • Windows 7
  2. Open the downloaded installation file.
  3. When prompted, enter your UCT username@wf.uct.ac.za and UCT network password.
or
Manually set up your computer

Instructions are available for:

  • Windows 10
  • Windows 7 and 8 (quick version)
  • Windows 7 and 8 (detailed steps)
  • Older Windows versions

 

Windows 10

  1. Ensure that your laptop’s Wi-Fi is switched on.
  2. Select the Network icon in the notification area (bottom-right corner).
  3. When the list of wireless connections appears, select eduroam and click Connect.
  4. When prompted, log on with your UCT credentials:
    • Username: username@wf.uct.ac.za (“username” is your student or staff number
    • Password: your UCT network password
  5. Select Connect when prompted to Continue connecting.
  6. Once you are successfully authenticated, the status will change to Connected. (Note that it may briefly display Limited before this.)

Your credentials should now be stored and you will only be prompted again when you change your UCT network password.

Windows 7 and 8 (quick version)

Connect to eduroam
  1. Ensure that your laptop’s Wi-Fi is switched on.
  2. Click WiFi Network in your system tray.
  3. When the list of wireless connections appears, select eduroam and click Connect.
  4. When prompted, log on with your UCT credentials:
    • Username: username@wf.uct.ac.za (“username” is your student or staff number)
    • Password: your UCT network password
      Note: You may be prompted to enter these credentials a few times.
  5. Accept the certificates for the UCT authentication servers (uc-acs.uct.ac.za and mc-acs.uct.ac.za).
  6. If your laptop can also connect via a network cable, configure your web browser(s) correctly.
Save your eduroam credentials to avoid future logins

After you first connect to eduroam, your credentials are not saved – so you will be asked to authenticate again each time you want to connect. To avoid this inconvenience, save your credentials by following this procedure.

  1. Click WiFi Network in your system tray.
  2. When the list of wireless connections appears, right-click eduroam and select Properties.
  3. In the properties dialog box:
    • Select Security.
    • Click Advanced settings.
  4. In the Advanced settings dialog box:
    • Select 802.1X settings.
    • Ensure the Specify authentication mode check box is selected.
    • Choose User authentication from the drop-down list.
    • Click Save credentials.
  5. In the Windows Security dialog box, enter your UCT credentials:
    • Username: username@wf.uct.ac.za (“username” is your student or staff number)
    • Password: your UCT network password
    • Click OK.
  6. Close the remaining dialog boxes by clicking OK.

WARNING:
When you change your network password, you will need to manually update the password in your eduroam settings. To do this, repeat steps 1-4. At step 4, you will see the Replace credentials button instead of the Save credentialsoption. Enter your new password and complete the remaining steps. To remove all users credentials proceed to step 4 and select the Delete credentials for all users check box.

 

Windows 7 and 8 (detailed version)

  1. In the Start menu, search for and open Network and Sharing Center.
  2. Select Set up a new connection or network.
  3. In the Set up Up a Connection or Network dialog box:
    • Select Manually connect to a wireless network.
    • Click Next.
  4. Enter these settings in the Manually connect to a wireless network dialog box:
    • Network name: eduroam
    • Security type: WPA2-Enterprise
    • Encryption type: AES
    • Click Next.
  5. After confirmation that eduroam has been successfully added, click Change connection settings.
  6. In the eduroam Wireless Network properties dialog box:
    • Select the Security tab.
    • Select Protected EAP (PEAP) from the Choose a network authentication method drop-down.
    • Click Settings.
  7. Enter these setting in the Protected EAP Properties dialog box:
    • Connect to these servers: enabled
    • Connect to these servers: uc-acs.uct.ac.za;mc-acs.uct.ac.za
    • Trusted Root Certification Authorities: DigiCert Global Root CA
    • Select Authentication Method: Secured Password (EAP-MSCHAP v2)
    • Click Configure…
  8. In the EAP MSCHAPv2 Properties dialog box:
    • De-select Automatically use my Windows logon name and password (and domain if any).
    • Click OK.
  9. In the Protected EAP Properties dialog box, click OK.
  10. In the Wireless network properties dialog box, click Advanced Settings.
  11. In the Advanced Settings dialogue box:
    • Select Specify Authentication Mode.
    • Select User Authentication in the drop down menu.
    • Click OK.
  12. Close the remaining dialog boxes and windows.
  13. If you are prompted to authenticate to the UCT network, enter your credentials:
    • Username: username@wf.uct.ac.za (“username” is your student or staff number)
    • Password: your UCT network password
    • Click OK.
  14. To avoid future logins, save your eduroam credentials.
  15. If your laptop can also connect via a network cable, configure your web browser(s) correctly.

 

Older Windows versions

See the older operating systems leaflet for Windows XP and Vista instructions.

 

Step 3: Configure your web browser(s) correctly

NOTE:
This step applies only to laptop or PC browsers. If you’re using a mobile device (e.g. smart phone or tablet), do not carry out these steps.

Please carry out these steps for each of the browsers you use on your computer.

Browser Instructions
Internet Explorer
  1. Open Internet Explorer.
  2. Click Tools > Internet Options.
  3. In the Internet Options dialog box, select the Connections tab.
    • Click LAN Settings.
  4. In the Local Area Network (LAN) Settings dialog box:
    • Ensure that all check boxes are cleared.
    • Click OK.
Firefox
  1. Open Firefox.
  2. Click Tools > Options.
  3. In the Options dialog box, click Advanced.
    • Select the Network tab.
      Under the Connection field, click Settings…
  4. In the Connection Settings dialog box:
    • Select No proxy.
    • Click OK.
Chrome
  1. Open Chrome and enter the following web address:
    chrome://chrome/settings/
  2. Select Show advanced settings.
  3. In the Settings page, under Network, click Change proxy settings…
  4. In the Internet Properties dialog box, select the Connections tab.
    • Click LAN Settings.
  5. In the Local Area Network (LAN) Settings dialog box:
    • Ensure that all check boxes are cleared.
    • Click OK.
Safari
  1. Open Safari.
  2. Click Safari > Preferences….
  3. In the Preferences dialog box, select the Advanced tab.
    • In the Proxies field, click Change Settings…
  4. In the Network dialog box, select the Proxies tab.
    • Ensure that all check boxes are cleared.
    • Click OK.
  5. In the Network dialog box:
    • Click Apply.
    • Close the Network dialog box.
Opera
  1. Open Opera.
  2. Click the Opera Menu and select Settings.
  3. In the Settings page, under Network, click Change proxy settings…
  4. In the Internet Properties dialog box, select the Connections tab.
    • Click LAN Settings.
  5. In the Local Area Network (LAN) Settings dialog box:
    • Ensure that all check boxes are cleared.
    • Click OK.

 

 

Warning: Using your laptop with 3G or other wireless services

After setting up and saving your eduroam connection, eduroam will allocate an IP address to your device. If you then connect your laptop to a different service that controls your wireless connectivity (e.g. a cellular 3G connection), you may experience issues with eduroam. If this happens, seek assistance from ICTS.

 

More UCT Information

UCT Student Login

UCT Prospectus 2021

UCT Online Application 2021

UCT Application 2021

UCT Application Form 2021 Pdf

UCT Closing Dates 2021

UCT Track Application

UCT Application Status 2021

UCT Registration 2021

UCT Address

UCT Student Email

UCT Staff Email

UCT Undergraduate Prospectus 2021

UCT 2021 Postgraduate Prospectus

UCT Undergraduate Application 2021

UCT Postgraduate Application 2021

UCT Residence Application

UCT Online Application Fee